Stainless steel · Signet
Red Stone Signet Ring
For the man who carries his authority lightly.
Two minutes with a strip of paper or a soft tape and you will order the right size first time.
Shown in centimetres (inches) and UK sizesMeasure at home in 2 minutes
You need a strip of paper (or a string or shoelace), a pen and a ruler.
With a ring that fits (most accurate)
- Lay a ring you wear on that finger on the ruler and measure the inside diameter, edge to edge, in millimetres.
- Find that diameter in the table below.
With a strip of paper
- Wrap the strip around the base of your finger: it must still slide over the knuckle.
- Mark where it overlaps, lay it flat and measure it in millimetres: that is the circumference. Find it in the table below.
Measure at the end of the day, when fingers are slightly larger.
No ruler? A bank card is 8.6 cm (3.4") long: count how many fit along your strip.
| UK | US | EU | Diameter | Circumf. |
|---|---|---|---|---|
| J½ | 5 | 49 | 15.7 mm (0.62") | 49.3 mm (1.94") |
| L½ | 6 | 52 | 16.5 mm (0.65") | 51.9 mm (2.04") |
| O | 7 | 54 | 17.3 mm (0.68") | 54.4 mm (2.14") |
| Q | 8 | 57 | 18.1 mm (0.71") | 57.0 mm (2.24") |
| S | 9 | 59 | 19.0 mm (0.75") | 59.5 mm (2.34") |
| U | 10 | 62 | 19.8 mm (0.78") | 62.1 mm (2.44") |
| W | 11 | 65 | 20.6 mm (0.81") | 64.6 mm (2.54") |
| Y | 12 | 67 | 21.4 mm (0.84") | 67.2 mm (2.65") |
| Z+1 | 13 | 70 | 22.2 mm (0.87") | 69.7 mm (2.74") |
| Z+3 | 14 | 72 | 23.0 mm (0.91") | 72.3 mm (2.85") |
| Z+4 | 15 | 75 | 23.8 mm (0.94") | 74.8 mm (2.94") |
| Z+6 | 16 | 77 | 24.6 mm (0.97") | 77.3 mm (3.04") |
Half sizes sit halfway between two rows (about 0.4 mm of diameter).
Good to know: measure at the end of the day, when fingers are slightly larger. Wide bands (8 mm and more) feel tighter: if you are between two sizes, take the larger one.
Or 3 interest-free payments of £20.00 with Klarnasubject to eligibility
- 100% waterproof
- Won't turn skin green
- Order processed within 24 hours
- 1-year warranty
- Free shipping over £59
- 30-day returns
Deep red, held with a steady hand.
He leads without raising his voice. A stainless steel signet ring that tapers from a wide, flat face to a slimmer shank, with a faceted red stone on top in a raised bezel. The facets catch light. Gold-tone looks warm and classic. Black looks harder and quieter. US 8 to 12.
Steel that does not rust.
The band is stainless steel. It does not rust and does not turn your skin green. Daily wear does not harm it. The gold-tone and the black are platings over the steel.
Atlas held the sky and never made a scene. Neither do you.
Details & specs
The ring is made from titanium steel, a stainless steel alloy that resists rust and corrosion and holds a polish. The band tapers from a wide, flat face down to a slimmer shank, so it sits heavy on top without crowding the fingers beside it. The shoulders carry a smooth mirror surface that frames the stone and catches light along the sides.
A single faceted red stone with a step-cut top is held in a raised bezel, which shields the edges of the stone and keeps the profile clean. It is a red stone, not a ruby, and we say so. The gold-tone and black colors are electroplated finishes. Both versions carry the same stone and exactly the same shape.
How to wear it
Wear it on the ring or middle finger of your dominant hand and let it stand alone: a wide signet like this does not need a stack. Gold-tone works with a white tee and a warm-toned watch, or under a cuff with a dark suit for a wedding or a night out. Black keeps things low-key with denim, leather and matte gray tones.
Choosing your size
The ring comes in US sizes 8, 9, 10, 11 and 12. Measure a ring you already wear on the same finger, or wrap a strip of paper around the finger and compare the length to a US size chart. Wide bands sit tighter than thin ones, so if you are between sizes or have larger knuckles, take the next size up.
Why this piece
Authority, quietly worn
A wide face and one red stone: presence and authority, worn without effort.
Steel base, daily wear
The band is stainless steel. It does not rust and does not turn your skin green, and daily wear does not harm it. The gold-tone and the black are platings.
Picked by him or for him
A gift for a man who likes a classic signet. Sizes run 8 to 12; check a ring he wears and size up if unsure. You have 30 days to return it.
Shipping & delivery
Free tracked shipping over £59
Below that, a flat tracked rate is shown at checkout.
- 1Order confirmedYou get an email straight away.Today
- 2Order processedEach piece packed on its own, tracking link by email.Within 24 hours
- 3At your doorDelivery times vary by country.
Returns
30 days to return
Any unworn piece in its original packaging, refunded in full to your original payment method. Return shipping is at your expense, except for a defective or wrong item.
- 1Contact usSend us a message with your order number.Within 30 days
- 2Send it backWe reply with the return steps.
- 3RefundedIn full, once the piece is back with us.
Wrong size? Order the size you need and return the other one within 30 days.
Warranty & care
1-year warranty
Against manufacturing defects. See how the warranty works.
Questions
Can the red stone signet stay on in the shower?
Yes for everyday water: the titanium steel does not rust, and the raised bezel shields the edges of the stone. Rinse off chlorine or salt and dry it to keep the electroplated color even.
Is the red stone a ruby?
No. It is a faceted red stone, cut and polished to reflect light like a gem, not a mined ruby.
Which red stone signet finish suits denim and leather?
Black, which keeps things low-key with denim, leather and matte gray tones. Gold-tone gives a classic signet feel with a warm-toned watch or a dark suit.
Is this ring for men?
Yes. It is a men's signet: a wide, flat face tapering to a slimmer shank, offered in US sizes 8 to 12.
What is a bezel setting?
A rim of metal that wraps around the edge of the stone and holds it in place. Here the raised bezel shields the edges of the stone and keeps the profile clean.
What is a step cut?
A cut with straight, parallel facets stepping down from a flat top, like stairs. It gives the red stone clean lines rather than a round sparkle.
Is the stone the same on both colors?
Yes. Gold-tone and black carry the same red stone and the same shape; only the electroplated color of the steel changes.
Is the band wide all the way around?
No. It tapers from the wide, flat face down to a slimmer shank, so it sits heavy on top without crowding the fingers beside it.
Gold ring with a red stone for a man
The Red Stone Signet Ring in Stainless Steel is a signet with a faceted red stone, bezel set, in gold-tone or black, US 8 to 12. For a rose gold-tone band with a purple lapis lazuli inlay, see the Rose Gold Tungsten Ring with Lapis Inlay.
Can a man wear a ring with a red stone every day without looking over the top?
Yes, if you keep the rest simple. Red Stone Signet Ring in Stainless Steel is a stainless steel signet with a faceted red stone in a raised bezel; the black version looks quieter than the gold-tone one (US 8 to 12). Wear it alone on the ring or pinky finger, and keep your watch and chain plain.
Gold-tone ring with a stone for a man, what do you have?
Red Stone Signet Ring in Stainless Steel is a signet with a faceted red stone in a raised bezel, in gold-tone (US 8 to 12). Cubic Zirconia Band Ring in Steel has cubic zirconia around the band in gold-tone. Gold-tone is a plating over steel.

