Stainless Steel Inlay CZ Ring
Stainless steel · Single cubic zirconia · Two-tone brushed and polished finish · Grooved edges · Sizes 6-13
A band with quiet detail and real presence.
It sits wide and flat on the finger, with a brushed center stripe running between polished, grooved edges. One small cubic zirconia is set flush into the band, so it catches light when you move and disappears when you don't. Wear it on the ring finger or the index, with a watch or on its own.
- ✓Two-tone contrast: brushed center, polished edges
- ✓Single flush-set cubic zirconia, nothing to snag
- ✓Stainless steel that resists rust and corrosion
Full description+
The piece
The band is stainless steel with an electroplated finish, offered in black and silver, gold and silver, or all silver. The center stripe is brushed for a soft matte tone, framed by polished raised edges that stay bright.
Small geometric notches are cut along both edges, giving the profile texture you can feel with a thumb. A round cubic zirconia is set flush into the center stripe, level with the surface, and the inside of the band is smooth and polished.
How to wear it
Wear it alone on the ring finger for a clean everyday look, or on the index with a steel or leather watch for something more deliberate. The silver version reads neutral with a white tee and jeans; black and silver works well with darker clothing and evening plans; gold and silver pairs with a gold-tone chain or watch. It is simple enough for the office and a wedding, and sturdy enough for daily wear.
Choosing your size
This ring comes in US sizes 6 through 13. If you already know your ring size, order it as is; because this is a wide band, some men prefer to go up one size for easier sliding over the knuckle. If you are unsure, measure a ring you already wear on the same finger, or wrap a strip of paper around the finger and compare the length to a ring size chart.
Why this piece
-
01Two finishes, one bandA brushed center against polished edges creates depth, so the ring looks considered rather than plain.
-
02Stone without the flashA single cubic zirconia sits flush in the band. It reads as a detail, not a statement.
-
03Built for everydayStainless steel resists rust and corrosion, so it handles hand washing, the gym bag and daily wear.
Specifications
Questions
Will it hold up to daily wear?
Stainless steel is a hard, corrosion-resistant metal, and the cubic zirconia is set flush so it has nothing to catch on clothing. Like any plated finish, the black and gold versions last longer if you avoid harsh chemicals and abrasives.
How do I care for it?
Wipe it with a soft, dry cloth after wear and clean it with mild soap and water when needed, then dry it fully. Keep it away from bleach, chlorine and perfume sprays.
Is this a good gift if I don't know his size?
It comes in US sizes 6 to 13, which covers most men. If you are guessing, size 10 is the most common men's size, or borrow a ring he already wears and measure its inside diameter.
All Atlas pieces are crafted to true men's proportions. Measure twice, wear forever.
How to measure: wrap a strip of paper around the base of your finger, mark where it overlaps, then measure the length in mm. That's your inner circumference.
| Atlas size | EU | US | UK | Diameter (mm) |
|---|---|---|---|---|
| S | 54 | 7 | N | 17.3 |
| M | 57 | 8 | P | 18.1 |
| L | 60 | 9 | R | 19.0 |
| XL | 63 | 10 | T | 19.8 |
| XXL | 66 | 11 | V | 20.6 |
Tip: measure at the end of the day when fingers are slightly larger. Knuckle wider than the base? Size up.
How to measure: wrap a soft tape around your wrist where you'd wear a watch. Add 1cm for a comfort fit, 2cm for a relaxed drape.
| Atlas size | Wrist (cm) | Bracelet length (cm) |
|---|---|---|
| S | 15.5–16.5 | 17.5 |
| M | 16.5–17.5 | 18.5 |
| L | 17.5–18.5 | 19.5 |
| XL | 18.5–19.5 | 20.5 |
Most men: M (16.5–17.5cm wrist) is our best-selling size.
How to wear: chain length is measured tip-to-tip. Below: how each length sits on a 6'0" frame.
| Length | Sits at | Best for |
|---|---|---|
| 45cm / 18" | Collarbone | Tucked or under a tee |
| 50cm / 20" | Just below collarbone | Most versatile · best-seller |
| 55cm / 22" | Mid-chest | Layered with a pendant |
| 60cm / 24" | Lower chest | Statement chains |
Tip: when in doubt, 50cm is the universal Atlas length — clean over a tee, sharp under a collar.
Or 4 interest-free payments of $17.49 with Klarna
Shipped & Delivered
-
Priority Dispatch · Order in — to ship today Your piece leaves our atelier the same day, fully tracked & insured.
-
Free Worldwide Delivery Tracked & insured to your door. Real-time tracking link sent the moment your order leaves our atelier.
-
Signature Atlas Box · Gift-Ready Every order ships in our matte black presentation case. Effortless gifting, every time.
-
30-Day Easy Returns Not the right fit? Send it back within 30 days for a full refund. Our team takes care of every step.
1-Year Warranty
Every Atlas piece is covered by our 1-year warranty against manufacturing defects. We stand behind the craftsmanship of every ring, chain and pendant we forge.
Atlas jewellery is built to be worn every day. Our pieces are resistant to water and sweat — train, swim, live in them. For pieces that need attention, contact our care team and we'll make it right.
Signature Packaging
Each order ships in the Atlas signature box — a matte black presentation case finished with our embossed logo and gold foil interior detail.
Inside, your piece rests on a velvet cushion, wrapped in a microfiber pouch for safekeeping. Built to be opened. Built to be kept.
Shipping & Returns
Free worldwide shipping on every order. Orders placed before 2pm CET leave our atelier within 24 hours, fully tracked and insured.
Delivery: a real-time tracking link lands in your inbox the moment your piece ships. Transit times vary by destination — your order will reach you safely.
Returns: not the right fit? You have 30 days to send it back for a full refund. Our care team handles every step — just message us and we'll take care of you.