For the man who never gives up on his people.
Stepped Edge Ring
Tungsten carbide · Brushed face
Two minutes with a strip of paper or a soft tape and you will order the right size first time.
Shown in centimetres and EU sizesMeasure at home in 2 minutes
You need a strip of paper (or a string or shoelace), a pen and a ruler.
With a ring that fits (most accurate)
- Lay a ring you wear on that finger on the ruler and measure the inside diameter, edge to edge, in millimetres.
- Find that diameter in the table below.
With a strip of paper
- Wrap the strip around the base of your finger: it must still slide over the knuckle.
- Mark where it overlaps, lay it flat and measure it in millimetres: that is the circumference. Find it in the table below.
Measure at the end of the day, when fingers are slightly larger.
No ruler? A bank card is 8.6 cm long: count how many fit along your strip.
| EU | US | UK | Diameter | Circumf. |
|---|---|---|---|---|
| 49 | 5 | J½ | 15.7 mm | 49.3 mm |
| 52 | 6 | L½ | 16.5 mm | 51.9 mm |
| 54 | 7 | O | 17.3 mm | 54.4 mm |
| 57 | 8 | Q | 18.1 mm | 57.0 mm |
| 59 | 9 | S | 19.0 mm | 59.5 mm |
| 62 | 10 | U | 19.8 mm | 62.1 mm |
| 65 | 11 | W | 20.6 mm | 64.6 mm |
| 67 | 12 | Y | 21.4 mm | 67.2 mm |
| 70 | 13 | Z+1 | 22.2 mm | 69.7 mm |
| 72 | 14 | Z+3 | 23.0 mm | 72.3 mm |
| 75 | 15 | Z+4 | 23.8 mm | 74.8 mm |
| 77 | 16 | Z+6 | 24.6 mm | 77.3 mm |
Half sizes sit halfway between two rows (about 0.4 mm of diameter).
Good to know: measure at the end of the day, when fingers are slightly larger. Wide bands (8 mm and more) feel tighter: if you are between two sizes, take the larger one. Tungsten carbide cannot be resized, so it is worth measuring twice.
- Order processed within 24 hours
- 1-year warranty
- Free shipping over €69
- 30-day returns
Three finishes on one band, and a thin line of warm light.
Atlas kept the sky off everyone else's shoulders. A man who does that needs a ring that stays calm. This one is tungsten carbide with a brushed silver-tone face, polished black stepped edges and a single gold-tone channel down the middle. From a distance it reads dark and solid; when your hand moves, a thin line of gold catches the light. It sits flat on the finger, in US sizes 6 to 14.
- Keeps going through sweat and showers
- Brushed face, black edges, gold-tone line
- 17 US sizes, half sizes to 13.5
Details & specs
The band is tungsten carbide, one of the hardest materials used in men's rings. That hardness is why the brushed surface keeps its texture through daily contact with keys, desks and steering wheels. The inside is finished in black and marked TUNGSTEN CARBIDE, and the profile sits flat against the finger, so it stays comfortable next to a watch on either wrist.
The face is brushed to a soft matte sheen and framed by polished black stepped edges. Down the center runs a narrow polished channel in gold tone, the only high-shine element on the ring. The black and the gold tone are electroplated finishes, and we say so; the tungsten carbide underneath does the hard work.
How to wear it
Wear it alone on the ring or middle finger, where the black edges do the work and the gold line stays subtle. It sits well next to a steel or black watch, and the gold channel lets you add a gold-tone chain or bracelet without a clash. Plain enough for the office and a suit, dark enough for a black tee and denim at the weekend.
Choosing your size
Sizes run from US 6 to 14, with half sizes from 6.5 up to 13.5. Tungsten carbide cannot be resized, so measure first: use a ring you already wear on the same finger, or measure at the end of the day when hands are slightly larger. This is a wide band, so if you are between two sizes, take the larger one.
Why this piece
Scratch-resistant, every day
Tungsten carbide resists scratching far better than softer metals and does not rust, so the brushed face keeps looking right through the gym and the shower.
Dark, not loud
The black edges keep the ring understated. The single gold-tone line gives it character without turning it into a statement piece.
For the man who carries everything
An easy gift for a father, a husband or a son. With 17 sizes from 6 to 14, check a ring he already owns and take the larger size if in doubt; you have 30 days to return it.
Shipping & delivery
Free tracked shipping over €69
Below that, a flat tracked rate is shown at checkout.
- 1Order confirmedYou get an email straight away.Today
- 2Order processedEach piece packed on its own, tracking link by email.Within 24 hours
- 3At your doorDelivery times vary by country.
Returns
30 days to return
Any unworn piece in its original packaging, refunded in full to your original payment method. Return shipping is at your expense, except for a defective or wrong item.
- 1Contact usSend us a message with your order number.Within 30 days
- 2Send it backWe reply with the return steps.
- 3RefundedIn full, once the piece is back with us.
Wrong size? Order the size you need and return the other one within 30 days.
Warranty & care
1-year warranty
Against manufacturing defects. See how the warranty works.
Questions
Can the stepped edge tungsten ring stay on for a swim?
Yes. Tungsten carbide does not rust. A soft, dry cloth afterward clears water marks from the brushed face and the black edges.
Will the gold line wear off?
The gold tone is an electroplated finish, so treat it like any plated jewelry and keep abrasives and harsh chemicals away from it. The tungsten carbide underneath is highly scratch-resistant.
Which size should I take in the stepped edge ring if I am between two?
The larger one. It is a wide band, sizes run US 6 to 14 with half sizes up to 13.5, and tungsten carbide cannot be resized later.
What is a stepped edge?
An edge that drops from the face in a small step instead of one slope. Here the stepped edges are polished black and frame the brushed silver-tone face.
Is the face silver-tone or black?
Silver-tone. The face is brushed to a soft matte sheen; black covers the stepped edges and the inside, and a thin gold-tone channel runs down the middle.
What is inside the band?
A black interior marked TUNGSTEN CARBIDE. It is smooth, and the profile sits flat against the finger.
Does it go with both steel and gold-tone pieces?
Yes. That is the point of three finishes on one band: the brushed face matches a steel watch, the gold-tone channel lets you add a gold-tone chain, and the black edges tie them together.
When will my order ship?
Orders are processed within 24 hours on business days, Monday to Friday. You get a confirmation email with your tracking number once it has shipped.
Two tone wedding band for men, black and gold
Black and gold reads bold but stays clean. The Black & Gold Inlay Tungsten Carbide Ring has black stepped edges and a gold-tone channel. The Black Tungsten Ring with Gold Flake Inlay sets a gold flake inlay in black tungsten. In steel, the Octagon Ring in Black or Steel comes in black and gold. See Two Tone Mens Wedding Band.
